Saving The Programme Settings; Loading Laundry; Inserting The Measuring Aid For Liquid Detergent; Use The Measuring Aid For Liquid Detergent - Siemens WG56B2A1IL User Manual And Installation Instructions

Table of Contents

Advertisement

Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
A programme is set.
¡
→ "Setting a programme", Page 32
The programme settings have
¡
been adjusted.
→ "Adjusting the programme set-
tings", Page 32
Press and hold Favourite for ap-
prox. 3 seconds.
Press Favourite to call up the
saved programme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 27
Requirements
The laundry is prepared and sor-
¡
ted.
→ "Laundry", Page 31
The drum is empty.
¡
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
Insert the detergent drawer.
4.
13.7 Use the measuring aid
for liquid detergent
To add liquid detergent, you can use
a measuring aid in the detergent
drawer.
Pull out the detergent drawer.
1.
Basic operation en
33

Advertisement

Table of Contents
loading

Table of Contents