Sony Handycam DCR-VX700 Operation Manual page 66

Identifying the Parts
About the ID of the Remote Commander
You can avoid remote control misoperation from other VCRs by setting the VTR4/1D/ HOLD selector
to 1D, "Use the supplied Remote Commander when vou set the VTRA /1D/HOLD selector to ID. When
vou use Remote Commander for the first time, vou need to register the ID as follows:
(1) Slide OPEN and open the battery cover.
(2) Press MENU to display the menu in the view finder.
(3) Press f or $ to select COMMANDER, then press EXECUTE.
(4) Press f or $ to select ID SET.
(5) Set the VTR4/ID/HOLD selector on the Remote Commander to ID
(6) Press STOP on the Remote Commander.
After the beep sound, the ID of the Remote Commander is registered, and the COMMANDER is set to
ID in the menu system.
(7) Press MENU to erase the menu display.
EXECUTE
When the BEEP is set to OFF in the menu system
The beep does not sound at step 6.