Table of Contents
Advertisement
①
②
③
④
⑤
⑥
⑦
Figure 4-67
Tightening torques:
● Firstly, tighten the nuts by hand.
Tightening torque: 0.5 Nm
● Then tighten the nuts in the specified sequence 1 to 4.
Tightening torque: 10 Nm
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
External heat sink
M6 studs
Heat-conducting foil
Cold plate
M6 nut
Spring washer
Washer
Mounting a Basic Line Module 40 kW with cold plate on an external heat sink
Line Modules Booksize
4.7 Basic Line Modules with cold plate
265
Advertisement
Table of Contents
