Electrolux WA SL2 EEV201 User Manual page 7

3
DISPLAY
A B
The display shows:
A
B
1) Only available for SPIN/DRAIN programme.
C
The phase symbols
• When a programme is set, all the symbols of the phases related to the pro-
gramme come on.
• When the programme starts, only the symbol of the phase in operation flashes.
• When the programme is completed, the symbol of the last phase is on.
D
E
F
C
M
The temperature of the set programme
Cold water
The spin speed of the set programme
1)
No Spin symbol
Rinse Hold symbol
Prewash phase
Washing phase
Rinses phase
Spin phase
The steam symbol comes on when you set a Steam programme.
The detergent overdosing symbol comes on at the end of the cycle
when the appliance detects too much detergent.
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The 'Rinse Hold' function is on.
• There is water in the drum.
D E F
L K
electrolux 7
G H I
J