Verifying The Configuration - HP 3600 v2 Series Configuration Manual

4. Configure a RADIUS scheme:
# Configure RADIUS scheme 2000 and enter its view.
<Device> system-view
[Device] radius scheme 2000
# Specify primary and secondary authentication and accounting servers. Set the shared key to abc
for authentication and accounting packets.
[Device-radius-2000] primary authentication 10.11.1.1 1812
[Device-radius-2000] primary accounting 10.11.1.1 1813
[Device-radius-2000] key authentication abc
[Device-radius-2000] key accounting abc
# Exclude the ISP domain name from the username sent to the RADIUS server.
[Device-radius-2000] user-name-format without-domain
[Device-radius-2000] quit
5. Configure an ISP domain:
# Create ISP domain bbb and enter its view.
[Device] domaim bbb
# Apply RADIUS scheme 2000 to the ISP domain for authentication, authorization, and
accounting.
[Device-isp-bbb] authentication lan-access radius-scheme 2000
[Device-isp-bbb] authorization lan-access radius-scheme 2000
[Device-isp-bbb] accounting lan-access radius-scheme 2000
[Device-isp-bbb] quit
6. Configure 802.1X:
# Enable 802.1X globally.
[Device] dot1x
# Enable 802.1X for port Ethernet 1/0/2.
[Device] interface ethernet 1/0/2
[Device-Ethernet1/0/2] dot1x
# Implement port-based access control on the port.
[Device-Ethernet1/0/2] dot1x port-method portbased
# Set the port authorization mode to auto. This step is optional. By default, the port is in auto mode.
[Device-Ethernet1/0/2] dot1x port-control auto
[Device-Ethernet1/0/2] quit
# Set VLAN 10 as the 802.1X guest VLAN for port Ethernet 1/0/2.
[Device] dot1x guest-vlan 10 interface ethernet 1/0/2

Verifying the configuration

Use the display dot1x interface ethernet 1/0/2 command to verify the 802.1X guest VLAN configuration
on Ethernet 1/0/2. If no user passes authentication on the port within a specific period of time, use the
display vlan 10 command to verify whether Ethernet 1/0/2 is assigned to VLAN 10.
After a user passes authentication, you can use the display interface ethernet 1/0/2 command to verity
that port Ethernet 1/0/2 has been added to VLAN 5.
100