On Timer Setup - Zenith L20V26C Installation, Setup & Operating Manual

On Timer Setup

-Timer function operates only if current time has been already set.
Use the menu button to select the
1
menu shown below.
Clock 10 : 45 AM
Clock
Off timer
On timer
Auto off
DE Move G Next Menu
2
Use the channel
select the On timer option.
3
Press the volume (
D,E
the channel ( ) buttons to set the
turn-on hour.
Clock
Off timer
On timer 8
Auto off
F G Move DE Adjust Menu
4
Press the volume (
D,E
channel ( ) buttons to set the min-
utes.
If you hold the channel (
minute display is changed in the sequence
of 00 01 02 ...58
in the reverse sequence for channel (
button.
- Unless a button is pressed within two hours after the TV is turned on by the On Timer function,
the TV will automatically turn off.
- TV must be in standby mode for the On Timer to work.
28
5
6
Off
D,E
buttons to
( )
G ) and then use
7
: 00 AM
TV 2
Vol 30
Hold
8
G
) and use the
D
) button, the
59, and changed
E )
Press the volume ( G ) button and then
D,E
use the channel ( ) buttons to
select the channel at turn-on.
Press the volume ( G ) button and then
D,E
use the channel ( ) buttons to
select the volume you want.
Clock
Off timer
On timer 8 : 30 AM
Auto off TV 2 TV 2
Vol 30
Hold
F G Move DE Adjust Menu
Press the volume ( G ) button and then
D,E
use the channel ( ) buttons to
select Hold or Run.
D E
Each press of channel ( , ) button
changes the menu option as shown below.
Run Hold
Press the menu button to save.
On Timer setup is complete.
206-3921