Table of Contents
Advertisement
Auto Programming: Finding/Erasing Channels
Channel Search (Auto Programming)
Channel Search (Auto Programming)
* For Auto program to work, the programming source must be connected to the TV and the TV
must be receiving programming signals either over-the-air or from a cable-type service
provider. (See page 7.)
* Auto programming memorizes all the channels from terrestrial TV signals or a cable TV service
provider.
* If channels from TV and cable TV search are duplicated, press the number buttons (0 ~ 9) to
change.
1
Use the
menu
screen menu shown.
Auto Program
Manual Program
Fine
DEF G
Use
And
* When the channel search is complete, use the channel (
channels after auto programming is complete.
* If you press the
nels found up to that time will be remained.
* Auto programming can only memorize the channels that are being received at that time.
206-3778
button to select the
A
enter
(
A
) button during auto programming, the function will stop and only chan-
2
Press the volume (
the channel search.
Wait for auto program to complete the
channel search cycle before choosing a
channel. The TV scans for over-the-air
channels and then channels provided by
a cable service.
Auto Program
A
Stop :
D,E
) buttons to review the memorized
G
) button to begin
Memorizing channel
number is displayed.
TV 63
34%
27
Advertisement
Table of Contents
