Table of Contents
Advertisement
Auto Programming: Finding/Erasing Channels
- For Auto program to work, the programming source must be connected to the TV and the TV must be
receiving programming signals either over-the-air or from a cable-type service provider.
Channel Search (Auto Programming)
Channel Search (Auto Programming)
Press the
a.prog
1
control.
Auto program
- When the channel search is complete, use the channel (
channels.
- If you press the
programming up to that time will remain.
- Auto programming function can memorize only the channels which are being received at that
time.
206-3839-01
button on the remote
F G
enter
(
A
) button in auto programming, the function will stop and only channels
2
Press the
a.prog
buttons to begin the channel search.
Wait for auto program to complete the
channel search cycle before choosing a
channel. The TV scans for over-the-air
channels and then channels provided by a
cable service.
Channel number being
memorized is displayed.
Auto program
Stop :
A
D,E
) buttons to review the memorized
F , G
or volume (
)
TV 63
34%
25
Advertisement
Table of Contents
