Antenna Connections - Zenith L20V26 Operating Manual

Antenna Connections

* For optimum picture quality, adjust antenna direction.
Indoor Antenna Connections
Indoor Antenna Connections
Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Apartment Buildings
* If you have a 75
nut. If you have a 300
then connect the converter to the antenna jack on the TV.
* When using 75
quality.
Outdoor Antenna Connections
Outdoor Antenna Connections
This type of antenna is commonly used in single family dwellings.
Single Family Home
* In poor signal areas, to get better pic-
ture quality, install the antenna as
shown to the right.
* If antenna is split for two TVs, use sig-
nal splitter for connection.
206-3778
75 Round Cable
300
Wall Connection Jack
round cable, insert the bronze wire and then tighten the connection
flat wire, connect the twisted wire to the antenna converter and
round cable, do not bend the bronze wire. It may cause poor picture
VHF Antenna
75
UHF
Antenna
300
Turn clockwise to
tighten.
Bronze Wire
Flat Wire
Antenna
Converter
Turn clockwise to
tighten.
Round Cable
Bronze Wire
Flat Wire
Antenna
Converter
VHF UHF
signal
Amplifier
R VIDEO L R ANT IN DC OUT
IO AUDIO
LL 75
12V/0.2A
MONITER OUT
Antenna jack
VIDEO L R DC OUT
AUDIO ANT IN
LL
75 12V/0.2A
MONITER OUT
Antenna jack
O L AUDIO R VIDEO L AUDIO R ANT IN DC OUT
LL 75
12V/0.2A
MONITER OUT
IN
13