Front Panel Controls/Inputs - Zenith H2546DT Installation And Operating Manual, Warranty

Front Panel Controls/Source Inputs
Using the front control panel to access the menus
1
To access the menus press the MENU button
on the control panel. Cycle through the vari-
ous menus by pushing the button repeatedly.
2
Press the SELECT button repeatedly to high-
light the option you want to modify.
3
Press either the Right or left ADJUST button
to modify the selected option.
4
The menu will disappear after a few seconds.
There are three jacks on the front of the Presentation TV
that make connecting Audio/Video devices like camcorders
very simple.
To use the front jacks as the signal source, simply plug a
composite video cable into the VIDEO jack. The TV will
automatically change its source setting to CAMPORT, as
indicated on the channel selection screen.
The Front Audio/Video jacks are a direct source
connection. If you have a device plugged into the
front Video jack, you will not be able to change
channels until you have unplugged the front
Video jack.
206-3489-O
Typical Front Panel Controls
captions adjust select menu
3 2
reset
Front
Reset
Used in con- Computer
Connector
junction with
the Clone Used for 800 x
600 60Hz SVGA
Programmer
type computer
hookup.
volume channel
1
video in L audio R
Left/Right Audio
Used for stereo sound from
various types of equipment.
Video
Connects the
video signals
from any
piece of
equipment.
P A G E 1 7
power