Before First Use; Control Panel - AEG L9FEC9412N User Manual

6. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Make sure that there is salt in the
compartment marked by
the proper water hardness level.
Refer to "How to set the water
hardness level".
4. Pour 2 litres of water into the
detergent compartment marked by
.

7. CONTROL PANEL

7.1 Control panel description
Programme dial
1
Display
2
Energy saving touch button (Eco)
3
Time saving touch button (Time
4
Save)
Skipping phase touch button
5
(Option)
• Wash phase skipping (Only Rinse)
• Wash and rinse phase skipping
(Only Spin)
• Only drain (Only Drain)
This action activates the drain system.
5. Pour a small quantity of detergent
6. Set and start a programme for cotton
Salt
and set
This removes all possible dirt from the
drum and the tub.
1
13 12
10
11
into the compartment marked by
.
at the highest temperature without
any laundry in the drum.
2
11 10 9 8 7
Start/Pause touch button (Start/
6
Pause)
Extra rinse touch button (Extra Rinse)
7
Delay start touch button (Delay Start)
8
Super steam touch button (Plus
9
Steam)
Anti-stain and prewash touch button
(Stain/Prewash)
Spin reduction touch button (Spin)
51
ENGLISH
3
4
5
6