The Water Softener (Softwater Technology) - AEG L9FEC9412N User Manual

Table of Contents

Advertisement

48
www.aeg.cn
Salt
Compartment for salt.
Read carefully 'The
Water Softener
technology ( Soft
Water)'.
Maximum level for detergent/
additives quantity.
When selecting a prewash
phase, put the detergent/
additive in a dosing ball
inside the drum.
5. THE WATER SOFTENER (SOFTWATER
TECHNOLOGY)
5.1 Introduction
The water contains harsh minerals. The
higher is the content of these minerals
the harder the water is.
A hard water can reduce the
effectiveness of the detergent, make the
fabrics stiffened, favour the fabric
shrinkage and colour fade.
This appliance is equipped with a water
softener able to provide the right degree
of water softening to preserve the fabric
integrity, colour brightness and ensuring
good wash performances at low
temperature.
The water softener should be adjusted
according to the water hardness of your
inlet water. A correct setting allows to
achieve the best washing results and the
maximum garments protection.
To set the water softener correctly,
please refer to 'How to set the water
hardness level'.
5.2 How to set the water
hardness level
The appliance allows you to chose
between 7 levels corresponding to 7
different ranges of water hardness.
Depending on the country, the water
hardness is expressed in equivalent
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
scales: e.g. French degrees (°f), German
degrees (°d), English degrees (°e) and
mmol/l.
If necessary, please contact your local
water authority to check the water
hardness in your area.
Check in the "Water hardness levels"
table which is the proper level.
To set the water hardness level:
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. Touch the
and the
buttons simultaneously (by touching
the two buttons at the same instant,
as shown in the next drawing) for
some seconds until the display shows
the default level C04 and the
indicator
goes on. It means the
water softener is active during
washing only.

Advertisement

Chapters

Table of Contents
loading

Table of Contents