AEG L9FEC9412N User Manual page 49

4. Touch repeatedly the
until the desired level appears (from
C01 to C07).
5. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfy most of the use condition.
However, if the inlet water is particularly
hard (C06 and C07 levels), we suggest to
set the water softener also during rinsing
phase to preserve the fabric softness.
Water hardness levels
Levels Water hardness range
(French de-
grees)
C01 ≤5
C02 6 - 13
C03 14 - 21
1) 22 - 29
C04
C05 30 - 37
C06 38 - 45
C07 ≥46
1) Factory setting, able to satisfy most of the use conditions.
5.3 Pouring salt
The water softener function acts through
special resins present in the appliance.
Once you have entered the menu by
pressing
1. Touch the
on.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
button
softener
Once you have entered the menu by
pressing
1. By touching the
water softener is excluded
completely. The indicator
the display.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
°f °d
(German de-
grees)
≤3
4 - 7
8 - 11
12 - 16
17 - 20
21 -25
≥26
To regenerate the resins and make them
ready to soften the water pour a special
salt in the compartment
ENGLISH
and the buttons:
button. The
This setting increases
the salt consumption.
and the buttons:
button twice, the
go off and the appears in
°e
(English de- mmol/l
grees)
≤ 4 ≤0.5
5 - 9 0.6 - 1.3
10 -15 1.4 - 2.1
16 - 20 2.2 - 2.9
21 - 26 3.0 - 3.7
27 - 32 3.8 - 4.5
≥33 ≥4.6
Salt
:
49
goes
and