Installing The Shield (Shading Hood, Xl2746K Only) - BenQ ZOWIE XL Series User Manual

Installing the Shield (shading hood, XL2746K only)

To help focusing in games, the Shield (shading hood) avoids the unwanted disturbance interfered with the
peripheral vision while playing.
For models that came with shading hoods, two shading hoods are inside the accessory box. Please be
careful to prevent damage to the Shield and the monitor. The shading hoods are well-designed and can fit
into your monitor properly. Do not use excessive force when installing Shield to avoid possible damage.
1. Prepare for the shield installation.
Place the monitor upright on its stand on a flat even
surface. Make sure the monitor is rotated to the
landscape mode.
2. Remove the stickers and the rubbers on
both sides of the monitor.
There are 2 holes protected by rubbers and stickers on
each of the right and the left side of the monitor.
Remove the stickers and the rubbers before shading
hood installation.
Keep the rubbers and insert them back to the holes if Shield
has been removed.
3. Attach the Shield to the monitor.
Two shading hoods are not identical. The logo should
be facing outward on the upper section.
Attaching the hoods by aligning the hooks to the holes
on both sides of the monitor. Once the hooks are
aligned properly, hold the bottom of the monitor as
illustrated to keep it stable, and slide down the hood
and the hooks will be locked into place.
1
1
22
2
1
2
1
2
2