Radio Antenna Connections; Accessory Audio/Video (A/V) Connections To Dvd+Vcr; Digital Device Connections - Zenith XBS344 Installation And Operating Manual

DVD+VCR Connections Panel (Continued)

Radio Antenna Connections

Connect the supplied FM/AM antennas for radio listen-
ing.
Connect the AM loop antenna to the AM antenna
1 1
connectors.
Connect the FM wire antenna to the FM antenna
2 2
connectors.
otes
To prevent noise pickup, keep the AM loop antenna
away from the DVD+VCR and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori-
zontal as possible.
AM loop antenna (supplied)
FM wire antenna (supplied)
Rear of DVD+VCR
Accessory Audio/Video (A/V)
Connections to DVD+VCR
Connect the VCR IN LINE1 or LINE2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using optional audio/video
cables.
Jack Panel of Accessory Component
(VCR, Camcorder, etc.)
AUDIO
OUTPUT
VIDEO
OUTPUT
Rear of DVD+VCR
14
R
L
OR
Front of DVD+VCR

Digital Device Connections

Connect the DIGITAL AUDIO IN (OPTICAL) jack on the
DVD+VCR to the digital audio out (optical) jack on your
digital device (DVD Player, Game device, etc.), using
optional optical audio cable.
To set source of DVD+VCR to OPTICAL IN, press AUX
on the remote control.
otes
If the audio format of the digital output does not
match the capabilities of your DVD+VCR, the
DVD+VCR will produce a strong, distorted sound or
no sound at all.
The Optical input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.
Game Device
OR
Rear of DVD+VCR
HDTV Receiver