NOMA CTI1515594 Instruction Manual

7 ½' Colorado Colour-Changing Tree
model no. CTI1515594
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Thank you for purchasing this Colorado Colour-Changing Tree. This tree assembles in less than one minute and is decorated
with LED light sets. For your convenience, it is equipped with a foot pedal switch for changing lighting functions.
This 7 ½ ' (2.3 m) tree is pre-strung with 500 lights.
CARTON INCLUDES:
• 3 pre-lighted tree sections (A - Top Section, B - Middle Section , C - Bottom Section)
• 1 sturdy metal tree stand
• 1 screw for tree stand
• 1 power supply cord with foot pedal switch
• 8 extra 3 V replacement LED bulbs
• 1 spare replacement fuse (3 A) for the power plug
• 2 bolts
FOR INDOOR/SEASONAL USE ONLY
CAUTION!
-
BEFORE ASSEMBLING OR DISASSEMBLING.
ASSEMBLY:
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place the tree
stand on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Unfold the tree base and insert the screw into the hole.
2. Carefully insert the bottom section (C) of the tree into the tree base and tighten the screws (see Fig. 1).
Fig. 3
Fig. 2
Fig. 1
|
www.noma.com
INSTRUCTION MANUAL
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
A
B
C
Tree base
Retain carton for storage purposes
concave
protuberance
Fig. 4
Fig. 5
Foot pedal Foot pedal
switch switch
Fig. 6
Instruction Manual
For indoor use only
Side Side
view view