7 ½' Lighted Collins Tree
model no.
CTI1515593
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Thank you for purchasing this Collins Lighted Tree. This tree assembles in minutes and is decorated with energy
saving LED light sets.
½'
This 7
(2.3 m) tree is pre-strung with 300 lights.
CARTON INCLUDES:
• 3 pre-lighted tree sections (A - Top Section, B - Middle Section, C - Bottom Section)
• 1 sturdy metal tree stand
• 1 screw for tree stand
• 6 extra 3.0 V LED replacement bulbs
• 3 spare 3 A fuses for LED light string
• 1 spare 5 A replacement fuse for extension cord-note: fuse is already in extension cord plug; slide access panel
to open (see Fuse Replacement below)
• 2 bolts
FOR INDOOR/SEASONAL USE ONLY
CAUTION!
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR DISASSEMBLING.
Please locate the plug and socket first before assembled each sections of the tree.
ASSEMBLY:
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place the
tree base on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Carefully insert bottom section (C) of tree into tree base. Make sure pole is firmly inserted into the tree base
and screw is tightened. Insert middle section (B) of tree into bottom section (C). Insert the top section (A) into
the middle section (B) (Fig. 1, 2, 3).
2. Locate light set plug from top section (A) and plug into outlet of extension cord mounted in section B (Fig. 4).
IMPORTANT:
Any outlets you need to plug into are not wrapped in tape.
|
www.noma.com
INSTRUCTION MANUAL
Do not remove the tape wrapped around the outlets of the extension cord mounted in section (B).
Fig. 3
C
Fig. 2
Fig. 1
1
1
E
E
A
Fig. 4
Fig. 4
E2 E2
B
Fig. 5
Fig. 5
6
6
Fig.
Fig.
Tree base
Instruction Manual
For indoor use only
Retain carton for storage purposes
Side
Side
view
view
Fig. 7