Table of Contents
Advertisement
1. MOUNTING
• Make sure that the ground wire is
connected between the earth termi-
nal on the chassis and the ship's
earth.
• Fasten the USB cable with the cable
tie (supplied) to the cable routing
peg.
1.2.1
Desktop Mounting
Fixing with KB fixing metal
1. Fix the KB fixing metal to the bottom of the control unit.
2. Fix the unit with self-tapping screws (5x20, local supply).
Fixing without KB fixing metal
1. Drill four mounting holes of 5 mm (RCU-024) or 4 mm (RCU-026) diameter refer-
ring to the outline drawing at the back of this manual.
2. Fix the control unit with four screws (RCU-024: M4, RCU-026: M3) from under
side of the desktop. (The M4 screws with a sufficient length for the thickness of
the desktop should be provided locally.)
1-2
KB fixing metal
RCU-024
RCU-025
Cable routing peg
Cable tie
USB cable
Ex. ECDIS control unit, bottom view
RCU-026
RCU-026
Advertisement
Table of Contents
