Table of Contents
Advertisement
B2711 FHD
Mode
Power On –
maximum operation
Power On – Max.
Brightness
Power On –
normal mode
Power On – Energy
Star
ECO
Readiness
(standby)
Off
If the computer detects inactivity (no input) it sends an appropriate signal to the monitor to
reduce the power consumption (power saving mode). The status LED of the monitor changes
colour to show the change in status. ECO operation is the pre-set factory default.
Once an input is made at the computer the screen contents are restored.
P series: Devices connected to the monitor (mouse, keyboard) cannot wake the computer
from standby mode if the screen itself is in standby mode.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
For maximum energy efficiency, the ACR (Advanced Contrast Ratio)
OSD setting is activated by default. Deactivate the ACR function to
achieve an optimised screen appearance.
Fujitsu
State
Maximum brightness /
with USB and audio
Maximum brightness
/ without USB and
audio
Without USB and
audio
Factory settings,
without USB and
audio
Without USB and
audio
Without USB devices
connected
Without USB devices
connected
Power consumption
Typical
Maximum
62.8 W
< 68 W
24.8 W
< 29 W
14.6 W
< 17 W
15.5 W
14.6 W
0.21 W
< 0.5 W
0.19 W
< 0.3 W
Additional information
Status LED
–
–
55
Advertisement
Table of Contents
