Table of Contents
Advertisement
Electrolux Blender EBR2000 Operating Insruction
11
•
Turn off the blender and unplug it when
it is not in use and for cleaning.
•
Take maximum care with your hands
when handling the blades.
•
Never use the blender to blend hot
liquid.
•
Plastic parts should never be dried at
or near direct heat sources.
•
The appliance must not be used for
mixing dyes (paints, or lacquer,
etc).This may cause explosions.
•
The use of accessories that are not
the blender's original ones may
damage its functioning and may cause
harm to the user and to the product
as well as loss of warranty.
•
In order not to lose the warranty and
to avoid technical problems, do not
try to fix the blender at home.
•
Do not use the product if the electrical
cord, plug or other components are
damaged in any way.
•
For replacement of parts, call an
Electrolux Technical Service Center.
Assembling The Blender
•
The blender comes with a fixed blade
system. Only an authorised technician
is allowed to disassemble the blade.
•
Place the jar on the motor housing,
then turn the jar clockwise until the jar
is fully secured. (Fig.1)
Fig.1
•
Replace the lid on the jar, then turn
it in clockwise or in anticlockwise
direction until the tab of the lid is
locked into the groove of handle
properly. (Fig.2)
OR
•
Insert the smart dosage cup and
lock it.
Disassembling
The Blender
•
Remove the plug from the socket.
•
Remove the lid.
•
Turn the jar anticlockwise and lift up.
Operating The Blender
•
Place the blender on a levelled, dry
surface.
•
Remove the lid and place all the
required ingredients into the jar.
Important! Do not exceed the
maximum capacity of 1.25 litres.
Fig.2
Advertisement
Table of Contents
