Table of Contents
Advertisement
Installation Instruction
Replace a malfunctioning sensor:
From the installer menu select Change system.
The system is searching for connected sensors.
The user selects the passive sensor, which should be replaced with a
new one.
Press
to loop through the found passive sensors or to cancel
replace sensor.
Press
when the correct passive sensor or "Cancel replace sensor?"
is selected.
If the user selected a passive sensor to replace, the user should now
select the new sensor.
Press
to loop through the found new sensors or to cancel re-
place sensor.
Press
when the correct new sensor to add is found or "Cancel
replace sensor?" is selected.
If the user selected a new sensor to add, the replacing of the sensors is
performed.
Add an extra sensor:
From the installer menu select Change system.
The system is searching for connected sensors.
Press
to loop through the found new sensors or to cancel add
sensor.
Press
when the correct new sensor to add is found or "Cancel add
sensor?" is selected.
If the user selected a new sensor to add, the sensor is added.
24 | © Danfoss | 2018.10
GX-850M ver. IV
Checking system
<------>
Replace sensor:
Sensor1
03FB2F
Replace sensor:
Sensor2
03FC24
Cancel replace
sensor?
Add sensor:
ID:
03ABC1
Add sensor:
ID:
03DEF1
Cancel replace
sensor?
Sensor replaced!
Checking system
<------>
Add sensor:
ID:
03ABC1
Cancel add
sensor?
Sensor added!
VUAPA422
Advertisement
Table of Contents
