Installation Instruction
Wait until correct number of sensors for System B is found.
when all sensors for System B are found...
Press
System B is installed...
System is being checked...
Press
to select system to configure.
Press
to configure selected system.
(Naming sensors, changing factory settings and setting priorities)
Please refer to "Changing parameters and performance of
systems" in "User Manual" for description of the configurable
parameters.
Press
to end configuration.
22 | © Danfoss | 2018.10
GX-850M ver. IV
1 Ground sensor
found. Accept?
System B
Installed!
Checking system
<------>
Config system:
System A
Config system:
System B
Press to end
Configuration.
VUAPA422