Electrolux END 42391S User Manual page 22

22 electrolux
5. remove the lower door;
6. pull off the ventilation grille which is
fixed by two screws;
7. Carefully place the appliance on its
back, totally unscrew the adjustable
foot and screw it in the opposite
side.
8. remove the bottom hinge by
unscrewing its fixing screws;
9. using a 12 mm spanner, unscrew
the hinge pin and reassemble it on
the opposite side of the hinge;
10.reassemble the lower hinge in the
opposite side, using the screws
previously removed;
H
11.Carefully replace the appliance in its
working position and adjust the
level of the appliance by screwing/
unscrewing the adjustable feet at
the bottom of the cabinet using
your fingers or a tool;
12.Slide the hole cover out of the
ventilation grille by pushing it in the
direction of the arrow and
reassemble it on the opposite side;
13.refit the ventilation grille, fixing the
screws;
14.reassemble the lower door;
15.reassemble the middle hinge (H) in
the opposite side;
16.reassemble the upper door.
17.In your documentation bag you will
find the upper hinge necessary to
make the reversibility. Please screw