3.3
Installing the engine guard (XC)
3.4
Mounting the handguard (XC)
–
Position the engine guard on the frame.
–
Mount screws
Guideline
Remaining screws,
chassis
–
Mount screws
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
S05562-11
–
Mount the handguard holder with screws
shell.
S05570-10
–
Pull off the rubber grommet.
–
Remove screw
–
Position the handguard. Mount and tighten screw
Guideline
Use the included screws for the handguard.
Screw, clutch lever
Screw, brake lever
S05571-10
–
Mount the cable ties.
–
Repeat the operation on the opposite side.
1
, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
2
with bushings, but do not tighten yet.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
1
2
.
M6
5 Nm (3.7 lbf ft)
M6
5 Nm (3.7 lbf ft)
WORK 3
on the handguard
2
.
9