KTM 450 EXC-F 2024 Setup Instructions page 22

3 WORK
3.7
3.8
20
Installing the front fender
V00340-10
V00341-10
Removing the seat
W00301-10
W00311-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
1
Remove screw .
–
Raise seat, pull it toward the fuel tank and take it off.
1
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 18)
p. 19)
.