2 SETUP
12
–
Position the turn signal on both sides on the license plate
holder, mount nuts
–
Position the license plate lamp on the license plate holder,
and mount and tighten screws
–
Connect the plug-in connections of the turn signals and
the license plate lamp with the wiring harness.
W00399-10
(All EU models, SIX DAYS EU and CN)
–
Drill a hole at marking
the size of the marking.
W00401-10
(All EXC-F US)
–
Drill a hole at marking
the size of the marking.
W00401-11
bp
with washers and tighten.
bq
.
A
on the license plate holder to
A
on the license plate holder to