Table of Contents
Advertisement
G Set the External Controller
Press the [BAND 3] button and use the [UP]/[DOWN]
buttons to select the type of controller (
64
95
-
).
* Refer to [External Control Settings] (page 24)
G Set the Parameter to be Controlled
Press the [BAND 4] button and use the [UP]/[DOWN]
buttons to select the parameter to be controlled
ti1
(
-).
* Refer to [External Control Settings] (page 24)
G Set the Parameter's Minimum Value
Press the [BAND 5] button and use the [UP]/[DOWN]
buttons to set the parameter's minimum value (the
parameter's value when the controller is set to its
0. 0
10. 0
minimum:
-
).
* Refer to [External Control Settings] (page 24)
G Set the Parameter's Maximum Value
Press the [BAND 6] button and use the [UP]/[DOWN]
buttons to set the parameter's maximum value (the
parameter's value when the controller is set to its
0. 0
10. 0
maximum:
-
).
* Refer to [External Control Settings] (page 24)
I EXP Pedal Settings
These settings are available when the EXP Pedal
E. P
"
" is selected as the controller in the External
Control Settings Section. (→ page 24)
After pressing the [UTILITY] button, use the [UP]/
[DOWN] buttons to select "
press the [STORE] button to enter the EXP Pedal
setting mode.
G Set the Minimum Value of the EXP Pedal
Sets the minimum value that indicates the position
of the EXP Pedal.
Press the [BAND 1] button and use the [UP]/[DOWN]
buttons to set the position (
You can also hold the [BAND 1] button and move
the EXP Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range (refer to the
illustration below) of less than 128 can not be used.
G Set the Maximum Value of the EXP Pedal
Sets the maximum value that indicates the position
of the EXP Pedal.
EP
1
31
,
-
,
E. P
" in the display. Then
0
128
-
).
Press the [BAND 2] button and use the [UP]/[DOWN]
buttons to set the position (
You can also hold the [BAND 2] button and move
the EXP Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range (refer to the
illustration below) of less than 128 can not be used.
* The value can not be set greater than that of the EXP Pedal's
Switch Setting.
Practical Effective Range
(more than 128)
G Transmitting Control Change Numbers from
the EXP Pedal
Set the MIDI control change number that is to be
transmitted when the EXP pedal is used.
Press the [BAND 3] button and use the [UP]/[DOWN]
buttons to set the control change number.
oFF
•
: MIDI is not transmitted
1
32
64
95
•
-
,
-
:
Control change number that is to be
transmitted.
Utility Mode
127
255
-
).
Maximum
Minimum
Adjustable
Value
Range
Maximum
Value
27
Hide quick links:
Advertisement
Table of Contents
