KCT-6S… Manual Counter/Tachometer/Timer KCT-6S-C/KCT-6ST-C 1.4 Description 1.1 Safety instructions and warnings Only use this display KCT-6S-C/KCT-6ST-C is a multipurpose device. – in a way according to its intended Depending on the programmed basic function, the purpose device operates like – if its technical condition is perfect •...
Page 4
KCT-6S… Pulse counter/Po si ti on indicator 3. Programming routine KCT-6S-C/KCT-6ST-C The first menu item is the selection of the basic operating mode, which determines the functions of the device. 1. Description • 6-digit display counter with SET/RESET-function • Red LED display, character height 8 mm Operating mode pulse •...
Page 5
KCT-6S… 4.1 Polarity of the inputs 4.4 Multiplying factor npn: switching for 0 V It can be set from 00.0001 up to 99.9999. The decimal point is set to pnp: switching for +U B 4 decimal places. „0“ is not accepted! 4.2 Switching on the 30 Hz filter (INP A, INP B) The filter provides input damping*...
Page 6
KCT-6S… Tachometer/Frequency meter 4.8 SET value KCT-6S-C/KCT-6ST-C The device will be set to 1. Description the set point by pressing • 6 digit frequency meter the red SET/RESET key or • Red LED display, character height 8 mm activating the SET/RESET •...
Page 7
KCT-6S… 4.2 Switching on the 30 Hz filter 4.6 Display mode The filter provides input damping* Value conversion and display in 1/s 30 Hz filter off (f max ) Value conversion and display in 1/min 30 Hzfilter on 4.7 Max. time to wait until „0“ is displayed 4.3 Multitplying factor This parameter indicates, how long it takes, when measuring is active, until „0“...
KCT-6S… Time meter KCT-6S-C/KCT-6ST-C 4.1 Polarity of the inputs 1. Description • 6 digit time meter with SET/RESET function • Red LED display, character height 8 mm • Display range from 0 to 999 999 • Leading zeros suppression. • Operation indicator: the decimal point of the 4.2 Switching on the 30 Hz filter (INP A, INP B) lowest digit blinks while the count is active.
KCT-6S… 4.4 Operating mode 4.7 SET value Time unit: seconds (accuracy depending on position of the The device will be set to decimal point*) the set point by pressing the red SET/RESET key or Time unit: minutes (accuracy activating the SET/RESET depending on position of the input.
KCT-6S… Count frequency: Ambient temperature: -20 ... +65 °C at 10 ... 26 V DC Power supply DC: 24 V 12 V 10 ...30 V -20 ... +55 °C at >26 ... 30 V DC Input level: Standard Storage temperature: typ.
KCT-6S… 7. Delivery includes: 8. Ordering code: 1 Digital display KCT-6S-C No output 1Panel mounting clip KCT-6ST-C Optocoupler output 1 Bezel for screw mounting, panel cut out 50 x 25 mm 1 Bezel for clip mounting, panel cut out 50 x 25 mm 1 Seal 1 Multilingual operating instructions 9.