Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pepperl+Fuchs SK-PC-D2-UU1-10-HS
Summary of Contents for Pepperl+Fuchs SK-PC-D2-UU1-10-HS
- Page 1 PROCESS AUTOMATION MANUAL USB Intrinsic Safety Barrier SK-PC-D2-UU1-10-HS...
- Page 2 USB Intrinsic Safety Barrier With regard to the supply of products, the current issue of the following document is ap- plicable: The General Terms of Delivery for Products and Services of the Electrical Indus- try, published by the Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most recent version as well as the supplementary clause: "Expanded reservation of proprietorship"...
-
Page 3: Table Of Contents
USB Intrinsic Safety Barrier Introduction................. 4 Content of this Document ..............4 Target Group, Personnel..............4 Symbols Used ..................5 Product Description ..............6 Intended Use and Function..............6 Technical Data ..................7 Dimensions................... 9 Transport, Storage, and Maintenance..........9 Disposal .................... -
Page 4: Introduction
USB Intrinsic Safety Barrier Introduction Introduction Content of this Document This document contains information that you need in order to use your product throughout the applicable stages of the product life cycle. These can include the following: Product identification Delivery, transport, and storage Mounting and installation Commissioning and operation Maintenance and repair... -
Page 5: Symbols Used
USB Intrinsic Safety Barrier Introduction Symbols Used This document contains symbols for the identification of warning messages and of informative messages. Warning Messages You will find warning messages, whenever dangers may arise from your actions. It is mandatory that you observe these warning messages for your personal safety and in order to avoid property damage. -
Page 6: Product Description
Product Description Intended Use and Function The SK-PC-D2-UU1-10-HS USB intrinsic safety barrier enables a host device (i.e., an industrial PC) that is in a non-explosion hazardous environment to be connected to an EXTA3 keyboard or similar USB device in Class I/Div. 2, Class II/Div 2, or ATEX/IECEx Zone 2/22 hazardous locations. -
Page 7: Technical Data
USB Intrinsic Safety Barrier Product Description Technical Data SK-PC-D2-UU1-10-HS Supply Rated voltage 9 ... 30 VDC (Um = 30 V SELV) Input current 120 mA nominal 500 mA max Indicators/operating means LED ON power - keyboard power - mouse Interface Interface type USB 1.1 or PS2... - Page 8 USB Intrinsic Safety Barrier Product Description SK-PC-D2-UU1-10-HS Directive conformity Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079- 11:2012 , EN 60079-15:2010 International approvals UL approval cULus (E106378) Control drawing 116-0337 Approved for Mountable in Class I, Division 2, Groups A, B, C, D...
-
Page 9: Dimensions
USB Intrinsic Safety Barrier Product Description Dimensions 22.5 mm (0.9") 7 mm (0.3") 85 mm (3.3") 22.5 mm (0.9") 7 mm (0.3") 85 mm (3.3") Transport, Storage, and Maintenance In case of defect, the device must be removed and replaced with a new one. Store all devices in a clean and dry environment. -
Page 10: Installation And Commissioning
USB cables, the connections 4, 8, 12, 14, 15, and 16 are grounded via the host PC. The precondition for this is that the GND line of the PC USB connection is internally connected to ground. This must be ensured by measurement. SK-PC-D2-UU1-10-HS Div. 2 / Zone 2... -
Page 11: Wiring And Grounding The Barrier With Exta3 And Host
USB Intrinsic Safety Barrier Installation and Commissioning Wire from the EXTA3 keyboard into the SK-PC-D2-UU1-10-HS keyboard barrier. Connect the keyboard and mouse as indicated below. Front view EXTA3 keyboard wiring Mouse wiring V+ = red D+ = green LED green:... -
Page 12: Wiring And Grounding The Barrier Via Terminal 16
Grounding is executed via terminal 16. In common application scenarios, pins number 4 (minus wires) of the host USB connectors are connected within the host. If not, connect pins 4 together to terminal 15: - D+ D- + SK-PC-D2-UU1-10-HS 4 3 2 1 Green White... -
Page 13: Connections
USB Intrinsic Safety Barrier Installation and Commissioning Connections Inputs from Host Connector Terminal Signal Name Direction Color Coding Input 1 (Host) Green White Input 2 (Host) Green White Supply PWR+ Supply PWR- Supply Input 1 (host) Supply Black (ground from host) Input 2 (host) Supply Black (ground... -
Page 14: Appendix
USB Intrinsic Safety Barrier Appendix Appendix Accessories Item Number Name Description Contact sales for individual EXTA 3 product family Keyboard and mouse configuration system—stand-alone option for Zone 2/22... - Page 15 PROCESS AUTOMATION – PROTECTING YOUR PROCESS Worldwide Headquarters Pepperl+Fuchs GmbH 68307 Mannheim · Germany Tel. +49 621 776-0 E-mail: info@de.pepperl-fuchs.com For the Pepperl+Fuchs representative closest to you check www.pepperl-fuchs.com/contact www.pepperl-fuchs.com Subject to modifications / DOCT-6424 Copyright PEPPERL+FUCHS • Printed in Germany 06/2019...