Table of Contents
Advertisement
Teflon-Covered Twinaxial Cable
Conductor
Core insulation
Shield
Jacket
Rating
Capacitance
Teflon Jacket
Shiel
Core Insulation (Teflon)
Conductor Insulation
Conductors (2)
R9476016-2
AWG wire size
20
Stranding
7 x 28
Material
Copper
Coating
Tin (1 conductor only)
Resistance
11 ohms maximum per 305 meters (1000 feet)
Material
Teflon
Outside diameter
6.1 millimeters (0.24 inch) nominal
Material
Tinned copper
Type
Braid, 34 AWG, 8 ends/16 carriers,
10.1 ± 10% picks/25.4 millimeters (inch)
Coverage
95% minimum
Resistance
3 ohms maximum per 305 meters (1000 feet)
Material
Teflon
Color
Translucent (white, natural, or light gray)
Average single wall thickness
0.63 millimeter (0.025 inch)
Outside diameter
7.00 millimeters (0.275 inch) nominal
Dielectric strength
4500 V de for 3 seconds at 28°C (82°F)
53.1 pF/meter {16.2 pF/foot) maximum
Impedance, characteristic
111 ±5% ohms at 0.5 MHz
Attenuation at 100 MHz
Velocity of propagation
Operating environment
107 ±5% ohms at 1 MHz
105 ±5% ohms at 1 MHz and above
4.5 dB/30.5 meters (100 feet)
maximum at 25°C (77°F)
4. 7 dB/30.5 meters (100 feet)
maximum at 80°C
{l
76°F)
65%-75%
-40°C to 105°C (.40°F to 221°F)
10% to 90% relative humidity
Notes:
1.
Teflon-covered cables comply with requirements of the National
Electrical Code (NEC) for low smoke-producing, air plenum
installed cables.
2. Teflon-covered cables do not have to run through a conduit.
32
Preparing to Install Your Work Stations - 5364
Advertisement
Table of Contents
