8. Insert the assembly into the plug body, aligning the slot in the
insulator with the pin inside the plug body. Tighten the clamp
nut with 5.7 to 6.8 N·m (Newton meters) (50 to 60 inch lbs)
torque. (The cable and plug body should not be allowed to
twist as the clamp nut is tightened.)
Plug Body
\
Cable
Clamp Nut
R9476076-0
9. Check for shorts between the conductors and between each
conductor and plug body.
38
Preparing to Install Your Work Stations-5364