Installation Preparation; Safety Recommendations; Universal Safety Recommendations; Moving Safety - Teldat Windbit WAP840-Iax Series Hardware Reference Manual

Windbit
2

Installation Preparation

2.1

Safety Recommendations

Note
⚫ To avoid injury to human body and equipment, read the safety recommendations in this manual carefully
before installation.
⚫ The following safety recommendations may not cover all possible hazardous situations.
2.1.1

Universal Safety Recommendations

⚫ High temperature, dust, harmful gas, flammable and explosive factors, electromagnetic interference (large
radar stations, transmitting stations, or substations) and the environment with unstable voltage, large
vibration or strong noise may affect the operating of AP. Do not install the device in such environment.
⚫ It is strictly forbidden to install the device in places prone to water accumulation, seepage, dripping, or
condensation. When performing engineering design, comprehensively consider the factors such as climate,
hydrology, geology, earthquake, electricity, transportation, and select the address that meets the
requirements of communication device engineering environment design according to the communication
network planning and technical requirements.
⚫ The installation site should be dry, and it is not recommended to install the device in a place very close to the
sea. The distance between the device and the sea should be greater than 500 meters, and it is not
recommended to place the device on the windward side of the sea.
⚫ Do not place the device in walking areas.
⚫ During installation and maintenance, do not wear loose clothing, jewelry, or other items that may be hooked
by the chassis.
⚫ Keep tools and device away from walking areas.

Moving Safety

2.1.2
⚫ Do not move the device frequently.
⚫ Turn off all power sources and unplug all power sources and cables before moving or handling the device.
2.1.3

Electrical Safety

Warning
⚫ Irregular and improper electrical operations may cause accidents such as fire or electric shock, and cause
serious or fatal injury to human body and device.
⚫ Do not directly contact high voltage and mains or contact them through wet objects; otherwise, it may bring
fatal danger.
WAP840-Iax Access Points
Access Point Hardware Installation and Reference Guide
17