Sfp Module Description - Teldat Windbit WAP840-Iax Series Hardware Reference Manual

Windbit
Reset key description
Table 1-9
Button Action
Type
Reset key Press and hold
for less than 2s
Press and hold
for more than 3s
1.6

SFP Module Description

The peer device that is directly connected to the 5G SFP port of the AP supports fiber ports and copper ports.
However, the negotiated rates are different when the devices at both ends use different port rates or use different
SFP modules. For details, see
Rate negotiation result when the peer is fiber port (unit: bps)
Table 1-10
AP SFP SFP
Port Rate Rate
1G 3G
1G 1G
2.5G 3G
2.5G 1G
5G 6G
5G 1G
Rate negotiation result when the peer is copper port (unit: bps)
Table 1-11
AP SFP O/E
Port Rate Rate
1G 2.5G
1G 1G
2.5G 2.5G
2.5G 1G
WAP840-Iax Access Points
Result
The device restarts.
Restore the factory settings.
Table 1-10 and Table 1-11.
Module Negotiation Rate Supported by Peer Port
1G
1G
1G
Not supported
1G
Not supported
1G
Converter Negotiation Rate Supported by Peer Port
1G
Not supported
1G
Not supported
Not supported
Access Point Hardware Installation and Reference Guide
1G/10G/auto
1G
1G
Not supported
1G
Not supported
1G
1G/10G/auto
Not supported
1G
Not supported
Not supported
1G/2.5G/5G/10G/auto
1G
1G
2.5G
1G
5G
1G
1G/2.5G/5G/10G/auto
Not supported
1G
2.5G
Not supported
15