Related Manuals for Cameo F4 FC
Summary of Contents for Cameo F4 FC
- Page 1 USER´S MANUAL BEDIENUNGSANLEITUNG MANUEL D´UTILISATION MANUAL DE USUARIO INSTRUKCJA OBSŁUGI MANUALE D´USO RGB W VERSION: 1.20 or later F4 FC PROFESSIONAL HIGH-POWER FRESNEL WITH RGBW LED CL4FC...
- Page 2 CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO ENGLISH ESPAÑOL SAFETY INFORMATION MEDIDAS DE SEGURIDAD INTRODUCTION INTRODUCCIÓN CONNECTIONS, CONTROL AND DISPLAY ELEMENTS CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS OPERATION DE VISUALIZACIÓN SETUP AND INSTALLATION FUNCIONAMIENTO INSTALLATION / DISASSEMBLY OF BARN DOOR AND INSTALACIÓN Y MONTAJE FILTER FRAME / CLEANING OF LENSES MONTAR/DESMONTAR LA VISERA Y EL BASTIDOR...
- Page 3 We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW.CAMEOLIGHT.COM.
- Page 4 CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel. The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.
- Page 5 TRUE1-compatible mains input socket Operating voltage 100–240 V AC/50–60 Hz. POWER OUT TRUE1-compatible mains output socket for power supply to additional CAMEO spotlights Ensure that the total current consumption of all connected devices does not exceed the value specified on the device in amperes (A).
- Page 6 NOTE • As soon as the spotlight is correctly connected to the power mains, “Welcome to Cameo”, the model designation, and then the software version are displayed in sequence on the display as part of the startup process. Once the process is complete, the spotlight is ready for use and resumes whichever mode was most recently activated.
- Page 7 SETTING THE DMX MODE (DMX Mode) Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to select the "DMX Mode" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now select the desired DMX mode by rotating the left encoder.
- Page 8 STAND-ALONE MODE HSI (Hue - Saturation - Intensity) Starting from the main display, press on the left push button rotary encoder to move to the mode select menu. Rotate the left encoder (SELECT) to select "HSI" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Dim level, hue and colour saturation (SAT) can now be configured using the three push button rotary encoders (see illustration).
- Page 9 STAND-ALONE MODE GEL (Colour Filter Presets) Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder (SELECT) to select "GEL" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). The brightness lev- el (DIM) and colour filter preset (Gel) can now be set using the left and center push button rotary encoder (see illustration).
- Page 10 STAND-ALONE MODE EDIT USER COLOUR (Edit User Colour) Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to select "Edit User Colour" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now select one of the 8 colour presets by rotating the left encoder and then confirm the selection by pressing on the left encoder (ENTER).
- Page 11 STAND-ALONE MODE PLAY LOOP (8-step colour sequences 1 - 8) Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder (SE- LECT) to select "Play Loop" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Now select one of the 8 preset but customizable colour sequences (loops) by rotating the left encoder.
- Page 12 SLAVE MODE Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder to select the “Slave” menu item (as indicated by selector arrow on left) and confirm by pressing the encoder (ENTER). Slave mode is now activated and the main display is automatically shown again.
- Page 13 DEVICE SETTINGS (Settings) Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to select "Settings" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). This will take you to the submenu for setting the submenu options (see table, select via SELECT, confirm via ENTER, change value or status via SELECT, confirm via ENTER).
- Page 14 Autolock Automatically locks the Automatically locks the control element after approx. control element 30 seconds of inactivity. If a subsequent attempt is made to use controls, display shows: "Locked!" Unlock method: simultaneous pressing of center and right encoder for approx. 3 seconds Deactivates automatic locking of the control element Fan settings Auto...
- Page 15 SETUP AND INSTALLATION Thanks to its four plastic feet, the spotlight can be placed in a suitable location on a flat surface. Install on a crossbeam using the prein- stalled mounting bracket (A) and a suitable crossbeam clamp (available as an accessory). Make sure that the spotlight is firmly attached and secure it using a suitable safety cable on the designated location on the top of the spotlight (B).
- Page 16 The front lens (G) and its rubber frame as well as the glass lens behind it (H) can be cleaned by flipping the retaining bracket upwards as previously described and then drawing the front lens and its rubber frame upwards out of the retention arms.
- Page 17 Pin Assignment 3-pin XLR connector: 5-pin XLR connector: DMX ADAPTER The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable adapters. Pin Assignment DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020 Pins 4 and 5 are not used.
- Page 18 Ambient temperature (in operation): -10°C to 40°C Housing material: Die-cast metal Housing colour: Black Housing cooling: Temperature-controlled fan + heat pipe Dimensions (W x H x D, without bracket 433 x 420 x 531 mm and barn doors): Weight: 18 kg Additional features: 250 mm glass Fresnel lens Manual zoom Power cable, filter frames, 8-way barn doors and mounting bracket included.
- Page 19 DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 2CH DIM 4Ch CCT 1CH DIM 2CH CCT 16 Bit 16Bit User User Function Values Sub-Group Color 1 Color 1 Dimmer 0% to 100% Dimmer Dimmer fine 0% to 100%...
- Page 20 0% to 100% Red fine 0% to 100% Green 0% to 100% Green Green fine 0% to 100% Blue 0% to 100% Blue Blue fine 0% to 100% White 0% to 100% White White fine 0% to 100% 0° (RED) thru 360° Saturation 100% - 0% Bulb White (2700K)
- Page 21 Tint Magenta -> Neutral (affects Color Tint Neutral Temperature) Neutral -> Green Lee Filter No. no function 46 Dark Magenta 29 Plasa Red 26 Bright Red 127 Smokey Pink 36 Medium Pink 19 Fire 135 Deep Golden Amber 778 Millennium Gold 21 Gold Amber 157 Pink 110 Middle Rose...
- Page 22 2 Rose Pink User Color_1 User Color_2 User Color_3 Color Presets User Color_4 (override RGBW, Color Presets HS, Color User Color_5 Temperature) User Color_6 User Color_7 User Color_8 no function Color Presets 0,1s - 10s (0,1s Steps) (override RGBW, 11s - 119s (1s Steps) Color Presets HS, Color 2m - 4m50s (10s Steps)
- Page 23 DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 2CH DIM 4Ch CCT 1CH DIM 2CH CCT 16 Bit 16Bit User User Function Values Sub-Group Color 1 Color 1 Dimmer 0% to 100% Dimmer Dimmer fine 0% to 100%...
- Page 24 CAMEOLIGHT.COM Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany Phone: +49 6081 9419-0 | adamhall.com REV: 06...