Contents 1. Safety information......................2 2. Technical information....................4 3. Attachment and body size..................8 4. Installation and connecting..................9 5. Control panel......................12 6. Menu setting.......................13 7. Channel function......................16 8. Circuit connecting diagram......................24 9. Cleaning and maintenances......................25 10.Troubeshooting..........................26 11.Duty exonerative and copyright protection............27 Congratulations on choosing our company product! We thank you for your custom. ◆Please note that this product, as all the others in the rich my company range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.
■This lighting fixture is for professional use only - it is not for household use. ■ Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be prgperly hooked onto the fitting and secured to the framework.
Page 4
Y type connection If the external cable or cord of the lamp is damaged, the cable shall be replaced by the manufacturer or its service agent or similarly qualified person to avoid danger. 80℃ The maximun temperature that can be reached on the external surface of the fitting, in a thermally steady state,is 80℃。...
●ELECTRICAL SPECIFICATIONS AND CONNECTIONS : Power supplies available AC100-240V,50/60Hz : Rated power 1530W(110V:maximum current 15.3A;220V:maximum current 7.65A) : Power factor PF 0.985 : Power connector PG power : DMX and RDM data in/out 3-pin XLR seat (5-pin XLR seat is optional) ●...
Page 6
Colour Wheel 1 color wheel, 5 colors + white light - Cyan: 0–100% Linear adjustment Magenta: 0–100% Linear adjustment - Yellow: 0–100% Linear adjustment CTO: 3000K~6500K Focus And Lens : High-precision electric zoom and focus Strobe :1-30 times/second adjustable electronic pulse strobe and random strobe - Dimmer : 0-100% linear adjustment, dimming without flicker ●CONTROL AND PROGRAMMING - RDM two-way data transmission,Remote reset DMX address...
Page 7
B Disc A Disc Rotating gobo wheel Blue Green Orange Green Blue Turquoise Orange Color wheel olour Cyan-A Cyan-B Magenta-B Magenta-A Yellow-A Yellow-B CTO-A CTO-B CMY color mixing system...
Safety rope Compact,standard clamp system equipped & easy installation Lamps can be placed on the floor through rubber feet, or installed on trusses and ceilings. Warning: a safety rope must be installed unless the lamp is placed on the floor. It is required that the safety rope must be firmly fixed on the lamp support, and then connected to the central fixing point of the base.
Page 11
N(White/Blue) L(Black/Brown) POWER IN (Green/Yellow Green) Wire color-coding and power connections: Wire Color Wire Color Conductor Symbol (EU models) (US models) black live brown neutral blue white green ground(earth) yellow-green connection to the eiectricty mains must be carried out by a qualified electrical ●...
Page 12
signal end DMX512 in DMX - output DMX-input 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected - Not connected - Not connected ● Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first projector's output to the second projector' input and connect the second projector's output to the third projector's input.
D isp l ay ENTER Up arrowhead : page up Down arrowhead : page down RIGHT LEFT Left arrowhead : reduce Right arrowhead : increase Enter : OK function Exit : in the choice screen DOWN ● Press the switch.The projector starts resetting the effects. At the same time,the following information scrolls on the display (please refer to the actual material) TEST...
CLEANING AND MAINTENANCES ■1.In order to ensure the fixture could work normally. It should be kept clean always . The lens should also be regularly cleaned to maintain an optimum light output. Do not use any type of solvent on lens. It will damage the fixture. ■2.Suggestion: The continue usage of the light don't exceed 4 hours.
TROUBESHOOTING It is recommended some solution for some normal trouble shooting. Any inextricability problems should always be handling by the professional person. Disconnect the power supply before maintenance the fixture. ■ LED off : ◎ Please check if install the suitable voltage ◎...
■ The light beam dark,not inhomogeneou. ◎ when the light suore is to the usage life,the light suore is not enough,please change a new one for the same description. ◎ Please check the reflector parts is dirty.Keep them clear. ◎ Please measure if the power supply is enough. ◎...