LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD CONTENTS 1.Safety information………………………………………………...….……2 2.Technical information……...…….………………………………….….…….3 3.Functional introduction………………………………………….…..……6 4.Physical modules………………………………………………..….…… 7 5.Assembling………………………………………………..….…………….8 6.Lamp-on operation…………………………..….………………...…..……10 7.Tripod packing…….……………………………………….….………11 8.Fixture dimension….……………………………………….…….………11 9.Lamp replacement….……………………………………….……………12 10. Colored paper installation………………………………..……….……..13 11.Circuit connecting diagram………………………………..……….……..14 12.Cleaning and serving…….…….…………………………..……………15 13.Troubleshooting…….………………………..……………………………15 14.Company information.……………………………………………………16 Note: As the company pursues a policy to improve its products all the time, the data contains in this manual are subject to change without notice.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 1.Safety information Minimum distance of illuminated objects : ● The projector needs to be positioned so that the objects hit by the beam of light are at least 3 meter. ● M inimum distance of flammable materials The projector must be positioned so that any flammable materials are at least 0.2 meters.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD ● M aximum ambient temperature Do not operate the fixture if the ambient temperature (Ta) exceeds 38 ℃ ● T emperature of the external surface The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state, is 60 ℃...
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 3.Functional introduction 1. Dimmer Manually linear dimmer, smooth and even dimming through the whole dimming range 0-100% 2.Frost Frost filter, impart frosted effect to light beam. 3.Iris Manually mechanical iris, used to regulate spot diameter.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 5.Assembling 1. Tripod assembling 1.1.Take out the Stand from packing carton and put it away (as picture 1), unscrew the sliders ( number 1,number 2). 1.2. Outward pull the stand feet or downward press the slider (as picture 2) 1.3.Twist the screw(number 5), then adjust the lifting handle to the suitable...
Page 10
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 2.Light assembling 2.1. Take out the Backing plate and Slider( as picture 3), then assemble and fix the U-type stand plate (as picture 4). 2.2.Take out the light from packing carton, to aim and install the assembling site of the light to the mounting holes (number 3, number 4) of U-type stand plate and fix the screws( as picture 5).
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 6.Lamp-on operation 1.1.Fist connect the follow spot to the mains via power cable ① , turn on power switch ② , push down lamp switch key ③ to ignite the lamp. 1.2.Turn on levers ④ ⑤ ⑥ ⑦ ⑧ ⑨ s ubsequently, and a casting beam comes out of the fixture.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 7.Tripod packing Keep the handle down when put the Stand into the fly case as the above picture 。 8.Fixture dimension www.lightsky.com.cn www.lightsky-china.com...
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 9.Lamp replacement 1.When the lamp totally cooling down , loose the crew ① ② ③ , open the rear cover. 2. Pull out the lamp cable. 3. Press the lamp softly ,lamp can be got out.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 10. Colored paper installation 1. Undo the 3 screws on the colored paper fixed plate as picture 1. Picture 1 2. Neatly put the colored paper into the middle of the fixed plate as picture 2, then pull up the colored paper as the direction of arrow as picture 3.
LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD 12.Cleaning and serving To ensure reliable operation, the projector shall be kept clean. It is recommended that the machine and the fan be clean every 15 days. The lens and the color separation filter shall be cleaned regularly to ensure optimal lighting effect.