Contents 1. Safety information......................2 2. Technical information....................4 3. Attachment and body size..................5 4. Installation and connecting..................6 5. Control panel......................9 6. Menu setting.......................10 7. Channel function......................12 8. Circuit connecting diagram..................13 9. Cleaning and maintenances..................14 10.Troubeshooting......................15 11.Duty exonerative and copyright protection............16 Congratulations on choosing our company product! We thank you for your custom. ◆Please note that this product, as all the others in the rich my company range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.
SAFETY INFORMATION ■This lighting fixture is for professional use only - it is not for household use. Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. Enhanced care has to be considered during the installation.
Page 4
80℃ The maximun temperature that can be reached on the external surface of the fitting, in a thermally steady state,is 80℃。 Avoid contact bypersons and materials. Allow the fixture to cool for at least 5 minutes before handling. ■The light source The light source in this xture shall be replaced by the manufacturer or its service agent or similar qualication.
TECHNICAL INFORMATION ● Power supplies available: 100-240V ~,50/60 Hz ● Rated power 530W : PF : 0.96 ● DMX Connector IP66 waterproof signal line. : ● Power Connector IP66 waterproof Power input line. : ● Light source :LUMILEDS 36×15W W hite 3000K-6000 K LED ●...
Page 8
N(White/Blue) L(Black/Brown) (Green/Yellow Green) POWER IN Wire color-coding and power connections: Wire Color Wire Color Conductor Symbol (EU models) (US models) black live brown neutral blue white green ground(earth) yellow-green connection to the eiectricty mains must be carried out by a qualified electrical ●...
Page 9
DMX IN DMX - output DMX-input 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected - Not connected - Not connected PIN3 PIN2...
CONTROL PANEL ENTER Up arrowhead : page up Down arrowhead : page down Left arrowhead : reduce RIGHT LEFT Right arrowhead : increase Enter : OK function Exit : in the choice screen DOWN...
MENU SETTING/菜单设置 Main menu Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Dmx Addr Edit A001~AXXX Hold/DMX (Default ) Black Color Temp1 Color Temp2 Color Temp3 Color Temp4 DMX Function Color Temp5 Dmx Set Color Temp6 Color Temp7 Color Temp8 Color Temp9 Color TempA Color TempB...
Page 12
Main menu Ⅰ menu Ⅱ menu Ⅲ menu ⅠV menu Manual Channel Dimmer... Control Calibration Dimmer Reset Default ClearTotalTime On/Off Temp To Power : On Default Service Factory Set On/Off Developer Manual Or Dmx : On Default On/Off LOGO Display :...
CHANNEL FUNCTION Standard channel( 1CH) Percentage Function Channel Value Note Dimmer 0..255 0-100% dimmer from dark to bright Note: For the color temperature of the light coming out from channel 1, 1~11 color temperatures should be selected in the "channel mode", and 1 color temperature is the default color temperature. channel(...
CLEANING AND MAINTENANCES/清洁与保养 ■1.In order to ensure the projector could work normally. It should be kept clean always . The lens should also be regularly cleaned to maintain an optimum light output. Do not use any type of solvent on lens. It will damage the projector. ■2.Suggestion: The continue usage of the light don't exceed 4 hours.
TROUBESHOOTING/疑难处理 It is recommended some solution for some normal trouble shooting. Any inextricability problems should always be handling by the professional person. Disconnect the power supply before maintenance the light. ■ LED off / LED: 1.Please check if install the suitable voltage. 2.Please check whether the led will reach the end of their life can explode;...