Gigabit Ethernet Connector; Input And Output Mode Connectors; Input Mode Connectors - Matrox Indio Installation And Hardware Reference

Gigabit Ethernet connector

The Gigabit Ethernet connector (10/100/1000 BaseT) is an 8-pin, RJ45
connector. The pinout of this connector follows the 1000 BaseT Gigabit Ethernet
standard found in the IEEE 802.3-2002 standard. The connector also supports
power-over-Ethernet (PoE).

Input and output mode connectors

There is a bank of 8 input mode connectors and 8 output mode connectors on
the Matrox Indio board.

Input mode connectors

The input mode connectors are standard, 2 mm spacing, 4-pin male connectors
that allow you to set the input mode of an auxiliary input signal using a jumper.
The description of possible jumper positions is as follows:
Input mode
PU
TTL
connector
15
14
13
12
11
10
9
8
I NPUTS
Matrox Indio connectors
Aux 15
Aux 14
Aux 13
Aux 12
Aux 11
Aux 10
Aux 9
Aux 8
77