Hardware-Assisted Profinet Led - Matrox Indio Installation And Hardware Reference

Hardware-assisted PROFINET LED

The hardware-assisted PROFINET LED communicates the status of the
PROFINET engine. The LED is visible from the outside of the computer chassis
through a hole in the bracket.
Hardware-assisted
PROFINET LED
LED color Description
off The PROFINET engine is either:
• Disabled. Hardware-assisted PROFINET is disabled (in the MILConfig utility).
• Enabled and a connection has been established with the PROFINET controller (for
red The PROFINET engine is enabled, but a connection has not been established with the
PROFINET controller
flashing green A device Identification diagnostic is being performed and a connection has been
established with the PROFINET controller. To establish which PROFINET device
corresponds to a device listed in the Siemens Totally Integrated Automation (TIA)
Portal application, you can enable the LED flashes option in the Assign name pane of
the Diagnostics item of the tree structure in the application. When this option is
enabled and a connection has been established with the PROFINET controller, this
LED flashes green.
flashing between A device Identification diagnostic is being performed, but a connection has not yet
red and orange been established with the PROFINET controller. You perform the diagnostic as you
would to make the LED flash green.
example, a PLC).
LEDs on Matrox Indio 81