InFocus JTouch 50 Hardware Manual page 47

Advanced settings
PC Module Shutdown
This option is for use with a built-in PC module only.
Users can select either to have the display shut down or switch the source to Android when the PC module is
shut down. The setting is made available as users may wish to stop using the built-in PC and move to Android
mode and making this setting change can allow the simple sway whilst reducing energy consumption.
Startup & Shutdown Schedules
The display can be automated to turn on and off at selected times and days. A reminder can also be shown
on the screen to inform users of the scheduled automation in case the display is still in use.
The "add boot task" is selected to create the startup time and day. This could be a single schedule with
multiple days or you can create multiple schedules for different days or times.
The"add off task" is created to turn of the display in the same way as the boot task is set.
47 InFocus - JTouch 50 Hardware Guide infocus.com | Always InFocus .