Table of Contents
Advertisement
AEC/Appllcatlon Engineering
e
Safety Considerations
AEC, Inc. True Temp™ TDH Series hot oil temperature control units are designed to provide
safe and reliable operation when installed and operated within design specifications and national
and local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, always use good judgment and follow these safe practices:
I!
Only
PROPERLY TRAINED
personnel familiar with the information within this manual
should work on this equipment.
fl
Follow all local
SAFETY CODES.
fl
TDH cabinets and piping are hot and are a
BURN HAZARD.
~
Do not operate a TDH unit without all outer panels installed. Pressurized hot fluid leaks can
cause serious injury.
!I
Wear
SAFETY GLASSES
and
WORK GLOVES.
•
~
Use care when
LOADING, UNLOADING, RIGGING,
or
MOVING
this equipment.
fl
Operate this equipment within design specifications.
•
"
OPEN, TAG, AND LOCK ALL DISCONNECTS
before working on equipment. AEC,
Inc. recommends removing the fuses and carrying them with you.
!I
Make sure the unit is properly
GROUNDED
before switching on power.
~
Do not jump or bypass any electrical safety control.
~
Do not restore power until all tools, test equipment, etc. have been removed and panels have
been replaced .
TOH True Temp
ni
Series Hot 011 Temperature Control Units
Pagel
Advertisement
Table of Contents
