How To Operate Adjustable Material Supports - Protocol CUT80 Product Manual

HOW TO OPERATE ADJUSTABLE MATERIAL SUPPORTS

2X10
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
VERTICAL ADJUSTMENT:
1.
Turn paddle knobs located on receivers
to adjust height of material supports.
HORIZONTAL ADJUSTMENT:
2.
Ensure material support is raised from
receiver. Turn paddle knobs located
underneath saddle to adjust saddle
from side to side.
3. BUMPER GUIDES:
Each material support is fit with a pair
of rotating bumper guides that prevent
stock from sliding off saddle.
Holes on each bumper guide can be
used to attach material to create a
fence or work bed.
9