Installing Paddle Knobs For Arm Extensions - Protocol CUT80 Product Manual

INSTALLING PADDLE KNOBS FOR ARM EXTENSIONS

NOTE:
These paddle knobs are used to adjust and secure length of arm extensions. Install
paddle knobs prior to material support installation.
1. Insert paddle knob into pre-drilled hole located on top of chassis.
2. Turn paddle knob to tighten it.
3. Repeat steps #1 and #2 to install second paddle knob on other end of chassis.
4. Use paddle knobs to adjust and secure length of arm extensions.
6
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM