Table of Contents
Advertisement
MOUNTING MITER SAW ASSEMBLY TO THE STAND
4.
Lower front of your miter saw assembly to sit flat into chassis.
5.
Slide miter saw assembly left or right to desired position.
6.
Turn both tool mount handles clockwise until stair steps are engaged and miter saw
assembly is secured in place.
NOTE: Do not overtighten – turn one half of a rotation after resistance is felt.
7.
Ensure weight of miter saw assembly is evenly balanced over chassis and adjust position
if necessary.
8.
Use 13 mm socket or wrench to fully tighten M8 nuts and secure miter saw assembly.
18
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
Advertisement
Table of Contents
