Table of Contents
Advertisement
INSTALLING ADJUSTABLE MATERIAL SUPPORTS
MATERIAL
SUPPORT
RECEIVER
1.
Pull out one of the arm extensions.
2.
Slide material support into receiver.
3.
Ensure material support is inserted correctly with tick marks on both saddle and beam
facing inward, toward chassis.
4.
Use PH1 screwdriver to secure locking screw into beam hole.
5.
Repeat steps #1 through #4 to install second material support to other arm extension.
8
ARM EXTENSION
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM
LOCKING SCREW
Advertisement
Table of Contents
