ATTACHING SLIM PROFILE TOOL MOUNTS TO YOUR MITER SAW
NOTE: If your miter saw mounting holes DO NOT line up with tool mount slots and tool mounts
are not parallel to each other when mounted:
a.
Make sure your miter saw is unplugged and saw arm is locked in the down position.
b.
Mount miter saw to a mounting surface at least 3/4" thick using required bolts,
washers, and nuts for your miter saw.
c.
Drill holes in mounting surface to match position of tool mount slots.
d.
Proceed with installation.
16
FIND OUT MORE AT PROTOCOLEQUIPMENT.COM