Setting Up The Mu90R In Your Music System; Connecting With A Computer; Macintosh - Yamaha MU90R Owner's Manual

As you learned in the section The MU90R — What It Is and What It
Can Do on page 4, the MU90R can be integrated into a variety of setups. It
would be impossible to cover all connection possibilities in a short manual
as this; however, the section below will help in quickly setting up the
MU90R and using it in your system.

Connecting With a Computer

The MU90R features a built-in host computer interface, allowing you to di-
rectly connect it to your computer — eliminating the need of installing a
special MIDI interface to your computer. The MU90R can be used with the
following computers: Apple Macintosh and IBM PC.
If your computer has a MIDI interface you may want to connect the
MU90R to it, rather than using the host computer interface on the MU90R.
(See the section "Connecting to Other MIDI Devices" on page 31.)
Depending on the computer or interface used, set the HOST SELECT
switch to the appropriate setting: MIDI, PC-1, PC-2 (IBM and clones), or
Mac (Macintosh). For information on the types of cables that can be used
for connection, see the section "MIDI/Computer Connecting Cables" on
page 35.

Macintosh

Follow these instructions if you have an Apple Macintosh not equipped
with an external MIDI interface. Connect the TO HOST terminal on the
MU90R to the Modem or Printer port on the Macintosh.
Modem or
Printer Port
Macintosh
GUIDED TOUR
2 9