Yamaha MU100R Sound List page 36

2.1.3.1 XG System On
This system exclusive message causes the
MU100R to function as an "XG"-compatible tone
generator.
Exclusive status
11110000 F0H
YAMAHA ID
01000011 43H
N:device Number
0001nnnn 1NH
Model ID
01001100 4CH
Address High
00000000 00H
Address Mid
00000000 00H
01111110 7EH Address Low
Data
00000000 00H
11110111 F7H End of Exclusive
When On is received, the SOUND MODULE
MODE will be set to XG, and all MIDI messages
defined by XG such as NRPN or bank select etc.
can be received.
Since approximately 50[ms] are required in order
to execute this message, please allow an
appropriate interval before transmitting the next
message.
2.1.3.2 XG System parameter change
This message sets the XG SYSTEM block (refer
to tables <1 -1>, <1 - 2>).
2.1.3.3 Multi Effect1 parameter change
This message sets the MULTI EFFECT1 block
(refer to tables <1 - 1>, <1 - 4>).
2.1.3.4 Multi EQ parameter change
This message sets the MULTI EQ block (refer to
tables <1 - 1>, <1 - 5>).
2.1.3.5 Multi Effect2 parameter change
This message sets the MULTI EFFECT2 block
(refer to tables <1 - 1>, <1 - 6>).
2.1.3.6 Unique Effect parameter change
This messages set the Unique Effect block (refer
to tables <1 - 1>, <1 - 7>).
2.1.3.7 Display parameter change
This message sets the DISPLAY block (refer to
tables <1 - 1>, <1 - 8>).
2.1.3.8 Multi Part parameter change
This message sets the MULTI PART block (refer
to tables <1 - 1>, <1 - 9>).
2.1.3.9 AD Part parameter change
This message sets the AD PART block (refer to
tables <1 - 1> , <1 - 10>).
2.1.3.10 AD System parameter change
This message sets the AD SYSTEM block (refer
to tables <1 - 1>, <1 - 11>).
2.1.3.11 Drums Setup parameter change
This message sets the DRUMS SETUP block
(refer to tables <1 - 1> , <1 - 12>).
2.1.3.12 Part Assign parameter change
This messages set the Part Assign block (refer to
tables <1 - 1> , <1 - 13>).
2.1.4 MU100 native parameter change (1)
This message sets parameters unique to the MU100. Each
message sets a single parameter.
As indicated below, the message format is in common with
the MU50, MU80, and MU90.
11110000
01000011
0001nnnn
01001001
0ggggggg
0mmmmmmm
0lllllll
0vvvvvvv
:
11110111
For parameters whose Data Size is 2 or 4, the number of
data bytes indicated by Size are transmitted.
2.1.4.1
This message sets the SYSTEM block (refer to
tables <2 - 1>, <2 - 2>).
2.1.4.2
This message sets the REMOTE SWITCH (refer
to tables <2 - 1>, <2 - 3>).
2.1.5 MU100 native parameter change (2)
This message sets parameters which are unique to the
MU100. Each message modifies a single parameter.
The format of this message is the same as for the MU90, as
shown below.
11110000
01000011
0001nnnn
01011001
0ggggggg
0mmmmmmm
0lllllll
0vvvvvvv
:
11110111
MIDI
MIDI data format
F0H Exclusive status
YAMAHA ID
43H
1NH N:Device Number
49H Model ID
Address High
GGH
MMH Address Mid
Address Low
LLH
Data
VVH
:
End of Exclusive
F7H
MU100 System parameter
change
Remote Switch
Exclusive status
F0H
43H YAMAHA ID
N:Device Number
1NH
Model ID
59H
GGH Address High
Address Mid
MMH
Address Low
LLH
Data
VVH
:
End of Exclusive
F7H
35