Yamaha MT2X Authorized Product Manual page 9

MASTER FADER
This controls the level of all the input faders, as well as the final level of the effected signal of the AUX RTN control
and the sound mixed through the stereo mix buss. The output level of the ST OUT jack
at mixdown) and the recording level during ping-ponging are also adjusted with this control.
Set the control input faders at "7" for best results.
AUX MASTER SEND CONTROL
This control adjusts the level of the effect-mixed signals
from each channel (adjusted by each AUX control
as well as the AUX signal for monitoring use. The final
output is through the AUX SEND jack
AUX RETURN CONTROL
This control adjusts the input level of effects or sub-
mixers connected to the AUX RTN jack
the effect in relation to the "dry" sound can be set with
this control.
SYNC SWITCH
Normally left in the "OFF" position, this switch should
be set to REC or PB if this unit is to be used for syn-
chronized operation with MIDI products like synthesizers
and rhythm machines. Synchro operation is explained in
the section on Sync-Recording on page 34.
POWER INDICATOR
This indicator lights when the power switch
rear panel is turned on.
7
)
. The level of
on the
(the recording level