Yamaha MT2X Authorized Product Manual page 23

Multitrack cassette recorder
Table of Contents

Advertisement

8. Post recording check
Return all switches and controls to their normal
positions.
Set the PHONES SELECT switch to the "MONITOR"
position, turn MONITOR LEVEL control 1 to "7",
then turn the PHONES volume control to about "7".
Make sure the METER SELECT switch is set to "4
TRK".
Press the PLAY switch, and check the sound record-
ed on track 1 by headphones, and by looking at the
level meter.
2 1
At this point, if the track is recorded properly and there
doesn't seem to be any problems, press the REW switch
and reset all the knobs and controls to their normal posi-
tions. Now it's time to record the bass.
If the recording is not to your satisfaction, you can re-
record the whole track. Or you can use the "punch-
in/punch-out" technique to record over a certain spot on
the tape. It's explained on page 26.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents